BRV192‑BT‑ST/SCA
BR V1-92 BELLYTANKER
Lug width: 20 mm
Source: MakerCase size: 38.5 mmGold-plated dialCase material: Polished-satin steel
- Attachment
- classic lugs
- Status
- Listed by the maker
Bell & Ross BR V1
Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.
20 mm
Verification: Listed by the maker
38.5 mm case
Find your exact reference
Official page: Bell & Ross
Report an errorIndicative information. Check your watch before buying a strap: whatsmylugwidth.com is not responsible for an incorrect size.
Collection5 references
Lug widths across the line
The Bell & Ross BR V1 takes a 20 mm strap: all 5 references with a listed width in our database use 20 mm. Check the reference on your case back to be sure.
Filter references by lug width
5 Bell & Ross BR V1 references
Bell & Ross BR V1 references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
-
-
BRV192‑BL‑ST/SCA
BR V1-92 BLACK STEEL
Lug width: 20 mm
Source: MakerCase size: 38.5 mmMatte black dialCase material: Polished-satin steel
- Attachment
- classic lugs
- Status
- Listed by the maker
-
BRV192‑BLU‑ST/SCA
BR V1-92 BLUE STEEL
Lug width: 20 mm
Source: MakerCase size: 38.5 mmSunny blue dialCase material: Polished-satin steel
- Attachment
- classic lugs
- Status
- Listed by the maker
-
BRV192‑MIL‑ST/SCA
BR V1-92 MILITARY
Lug width: 20 mm
Source: MakerCase size: 38.5 mmBlack dialCase material: Polished-satin steel
- Attachment
- classic lugs
- Status
- Listed by the maker
-
BRV192‑BB‑ST/SCA
BR V1-92 RACING BIRD
Lug width: 20 mm
Source: MakerCase size: 38.5 mmWhite dialCase material: Polished-satin steel
- Attachment
- classic lugs
- Status
- Listed by the maker
No reference matches.
FAQ
What lug width does the Bell & Ross BR V1 use?
The Bell & Ross BR V1 takes a 20 mm strap: all 5 references with a listed width in our database use 20 mm. Check the reference on your case back to be sure. The Bell & Ross BR V1 ref. BRV192-BT-ST/SCA, BRV192-BL-ST/SCA and 3 more take 20 mm (listed by the maker).
Where do these Bell & Ross BR V1 lug widths come from?
From our database, which lists 5 Bell & Ross BR V1 references, 5 of them with a listed width. Each reference card says whether the maker lists the width, two independent sources agree on it, or it is not yet verified.
Other Bell & Ross collections
Help
What is lug width?
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Measure it in 30 seconds
- Take the strap off, or look at the back of it: many straps print their width.
- Measure the inside gap between the lugs with a caliper or a millimetre ruler.
- Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.
Strap, quick release or system?
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.