EN

Omega Speedmaster Mark

The strap size depends on the reference. Yours is engraved on the case back or between the lugs at 6 o'clock.

20 or 22 mm

Verification: From our database, not yet verified

41 to 42.4 mm cases

Filter references by lug width

Indicative information. Check your watch before buying a strap: whatsmylugwidth.com is not responsible for an incorrect size.

Watch line8 references
20 mm
Illustration drawn to scale: 42 mm case, 20 mm lugs

The story · Since 1969

The story of the Omega Speedmaster Mark

In 1969, the year the Speedmaster went to the Moon, Omega was already redesigning it: the Mark II brought a barrel-shaped case and a mineral crystal. The Mark series ran until the mid-1980s with the Mark V, and Omega reissued the Mark II in 2014.

1969 to 1984

years from the first Mark II to the Mark V

Read the full storyHide the story
1969 to 1984years from the first Mark II to the Mark V
28,800 vibrations per hourbeat of the Mark III's calibre 1040, faster than earlier Speedmaster movements

Chapters

  1. 1969 to 1972

    Mark II, the first redesign

    Omega introduced the Speedmaster Professional Mark II ref. ST 145.014 in 1969, with a barrel-shaped case, a tachymeter under the crystal and the same hand-wound calibre 861 as the Moonwatch. It was the first Speedmaster without a hesalite crystal. Fratello links it to a NASA prototype project codenamed Alaska. The regular Moonwatch stayed in production alongside it.

  2. 1971 to 1974

    The Speedmaster learns to wind itself

    The Mark III of 1971, in a 'pilot' case, was Omega's first self-winding chronograph, powered by the new calibre 1040 with a central chronograph minute hand and a 24-hour indicator. A 1972 advertisement said that after six Moon landings the only thing left to teach the Speedmaster was to wind itself. The Mark IV followed in 1973 with the same calibre.

  3. 1974 to 1984

    The unofficial Mark 4.5 and the Mark V

    In 1974 came the Mark 4.5, never an official Mark, using the Lemania 5100 based calibre 1045. The Mark V of 1984 used the same calibre in a case first designed for a 1982 Speedmaster sold in West Germany, and closed the vintage series.

Moments

Omega launched its first self-winding chronograph, the Mark III, in 1971; a 1972 advertisement said that after six Moon landings the only thing left to teach the Speedmaster was to wind itself.

Omega's own history page states that several Mark III watches were delivered to NASA astronauts Ron Evans and Jack Lousma. It does not say they wore them in flight; the Smithsonian holds the Omega Speedmaster chronograph NASA issued to Lousma for Skylab 3.

Generations and strap changes

  1. 2014
    Mark II, ref. 327.10.43.50.01.001 and 327.10.43.50.06.001

    The reissue in black (01) and grey racing (06) versions, with the column-wheel Co-Axial calibre 3330, date, 52 hours of power reserve and a Super-LumiNova lit tachymeter ring under the sapphire on the racing version.

    Omega lists 20 mm between the lugs, 42.4 x 46.2 mm, 14.85 mm thick, on a steel bracelet with a foldover clasp and comfort setting (ref. 327.10.43.50.06.001).

  2. 1984
    Mark V, ref. ST 376.0806

    Calibre 1045 automatic chronograph with day, date and 24-hour indicator, black dial with tritium, 50 metres water resistance. Omega's archive calls it the German version.

    Omega lists it on an integrated stainless steel bracelet.

  3. 1974
    Mark 4.5

    A Mark IV with a different movement, the Omega calibre 1045.

  4. 1973
    Mark IV

    The second automatic Mark, again with the calibre 1040; WatchTime and Fratello date it to 1973.

  5. 1971
    Mark III, ref. ST 176.002

    Omega's first self-winding chronograph, calibre 1040 at 28,800 vibrations per hour, central 60-minute hand with a cross tip, 24-hour day and night indicator at 9 o'clock. Omega says several were delivered to NASA astronauts Ron Evans and Jack Lousma.

    Omega lists a 41 mm diameter and the steel bracelet ref. 1162/172.

8 Omega Speedmaster Mark references

Omega Speedmaster Mark references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 327.20.43.50.01.001

    Speedmaster Mark Speedmaster

    Lug width: 20 mm

    Source: Database

    Case size: 42.4 mmGrey dialCase material: Steel - Sedna™ gold

    Attachment
    classic lugs
    Status
    Listed in our database, not yet verified
  • 145.014

    Speedmaster Mark II

    Lug width: 20 mm

    Source: Database

    Case size: 42 mmBlack dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Screw-down steel
    Production
    1969-1972
    Status
    Listed in our database, not yet verified
  • 327.10.43.50.01.001

    Speedmaster Mark II

    Lug width: 20 mm

    Source: Database

    Case size: 42 mmBlack dialCase material: Steel

    Style
    chrono
    Movement
    Automatic Chronograph
    Caseback
    Screw-down steel
    Production
    2014, present
    Status
    Listed in our database, not yet verified
  • 327.10.43.50.06.001

    Speedmaster Mark II 2014 Grey

    Lug width: 20 mm

    Source: Database

    Case size: 42 mmGrey dialCase material: Steel

    Attachment
    integrated
    Style
    chrono
    Movement
    Automatic
    Caseback
    Sapphire back
    Production
    2014, present
    Status
    Listed in our database, not yet verified
  • 327.10.43.50.06.001‑RC

    Speedmaster Mark II Racing (2014, integrated bracelet)

    Lug width: Integrated bracelet

    Source: Database

    Case size: 42 mmGrey/Orange dialCase material: Steel

    Attachment
    integrated
    Style
    chrono
    Movement
    Automatic
    Caseback
    Display back
    Production
    2014, present
    Status
    Listed in our database, not yet verified
  • Speedmaster Mark II Racing (vintage 145.014) [145.014 Racing to verify]

    Lug width: 22 mm

    Source: Database

    Case size: 42 mmGrey/Orange Racing dialCase material: Steel

    Style
    chrono
    Movement
    Manual Chronograph
    Caseback
    Screw-down steel
    Production
    1969-1972
    Status
    Listed in our database, not yet verified
  • 176.002

    Speedmaster Mark III

    Lug width: 22 mm

    Source: Database

    Case size: 41 mmBlue dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Automatic Chronograph
    Caseback
    Screw-down steel
    Production
    1971-1977
    Status
    Listed in our database, not yet verified
  • 376.0806

    Speedmaster Mark V

    Lug width: 20 mm

    Source: Database

    Case size: 41 mmBlack dialCase material: Steel

    Attachment
    classic lugs
    Style
    chrono
    Movement
    Automatic Chronograph
    Caseback
    Screw-down steel
    Production
    1984-1988
    Status
    Listed in our database, not yet verified

FAQ

What lug width does the Omega Speedmaster Mark use?

Omega Speedmaster Mark references use 20 mm or 22 mm depending on the reference and case size, so check yours in the list below. The most common is 20 mm (5 of 7 references with a known width). These widths come from our database and are not yet verified.

Do all Omega Speedmaster Mark references take the same strap?

No. 2 different lug widths appear across the line, often by case size or generation. Check the reference engraved on the case back or between the lugs.

What is the lug width of the 2014 Speedmaster Mark II?

Omega lists 20 mm between the lugs for the 2014 Mark II ref. 327.10.43.50.06.001, with a 46.2 mm length and 14.85 mm thickness.

Which bracelet belongs on a vintage Mark II or Mark III?

Omega lists the Mark II ST 145.014 on steel bracelet ref. 1162/173 and the Mark III ST 176.002 on ref. 1162/172.

Other Omega collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.